Opening Sky Vision


Opening angle of 30 degrees for comfort ventilation

System Information

SkyVision Comfort rooflights are an ideal solution for areas where natural light and natural ventilation are required.

The comfort rooflights incorporate a 24 volt actuator within the kerb to facilitate the opening of the rooflight to an angle of up to 30 degrees. As with other SkyVisions these can be installed to a pitch of between 4 & 15 degrees. The rooflight also comes with a control panel and switch, additional items are available including rain sensors and thermostat control.

SkyVision Comfort rooflights have been impact tested to TN66/67 standard to ensure high safety standards.

SkyVision rooflights are CE marked according to DS/EN14351-1.

SkyVision Comfort rooflights have a U-value of 1.24 W/m²K, 115 mm silk screen printing along the edge for UV protecting the sealing, Low ‘e’ insulated pane with thickness on 32 mm. Outer glass 8 mm tempered float, 16 mm argon with aluminium spacer, inner glass 8.4 laminated low ‘e’.

SkyVision Comfort skylight is delivered with frame, sash, flashing and screws for mounting the sash on the frame, and an installation manual, the timber kerbs can be ordered either 150 mm high or 300 mm high.

Solar Vision Limited provide either a supply only service or we can instal SkyVisions as part of a larger project including other systems

SkyVision Comfort rooflights are available in a variety of sizes as listed below, delivery can be made in 3 – 4 weeks to any UK destination, some sizes may take longer, please contact us for prices and delivery details.

Available Sizes – Internal Finish Dimension Stated

600mm x 600mm
600mm x 800mm
600mm x 1000mm
600mm x 1200mm
600mm x 1500mm
600mm x 2000mm
800mm x 800mm
800mm x 1000mm
800mm x 1200mm
800mm x 1500mm
800mm x 2000mm
1000mm x 1000mm
1000mm x 1200mm
1000mm x 1500mm
1000mm x 2000mm
1200mm x 1200mm
1400mm x 1400mm